Persons are to use designated entry, exits and walk paths and crossings. Persons must be vigilant and aware of surroundings at all times due to various equipment and operations at the Port and stand clear of equipment at all times.

Persons must not enter / wander onto unauthorized areas.

Persons to the transit shed must wear closed toe shoes .
Persons wearing slippers and open toe shoes will not be allowed entryPersons must be properly attired at all times.

Sleeveless vests will not be allowed

PPE Requirements

Persons entering the operations yard / quay / pier must wear long pants, sleeved shirts/ t-shirts, safety toe shoes, safety glasses, reflective vests and safety helmets.

Sleeveless vests will not be allowed.

Additional PPE such as gloves, safety harness etc. may be required based on the scenario /task being performed. Use appropriate PPE as necessary.
Consult with the EHS personnel if unsure about the appropriate / required PPE.

Persons must be aware of their surroundings and the dangers present at all times.Do not stand in operational areas / drive paths.

Persons must alert others to danger which may be present and report to the Supervisors / EHS personnel.

Persons must follow the safety procedures of the Port. Playing of music / use of headphones is prohibited. Use of cell phones while operating equipment, loading/offloading cargo or directing equipment is prohibited. Horseplay is prohibited

Smoking is prohibited.
‍Flammable /explosive chemicals must be properly secured and labelled.
Report chemical spills / leaks /emissions immediately and clear the area of persons.

Fire extinguishers are located throughout the compound. Conduct welding /cutting / hot works only after flammable / explosive materials are removed from the work area.
Do not perform welding / cutting / hot works on containers / tanks or anything containing flammable / explosive material.

Chemicals are to be segregated and stored appropriately.

Safety Data Sheet to accompany chemicals. Pay attention to chemical labelling and warning / hazard symbols.

Report chemical spills / leaks / emissions and immediately and clear the area.

Persons entering the operations yard / quay / pier must wear long pants, sleeved shirts/ t-shirts, safety toes. Ensure tools are in good working condition inclusive of cords and plugsEnsure tools are properly grounded. Do not operate electrical equipment in wet environments.

Ensure all electrical fixtures and wires are properly installed / secured. Use trained / certified persons for electrical work. Do not work on live circuits, isolate energy and test circuit before work is started hoes, safety glasses, reflective vests and safety helmets.

Sleeveless vests will not be allowed.

Additional PPE such as gloves, safety harness etc. may be required based on the scenario /task being performed. Use appropriate PPE as necessary.
Consult with the EHS personnel if unsure about the appropriate / required PPE.

Use equipment within designed working limits. Check equipment prior to use to ensure proper functionality.

Report equipment problems / issues forthwithBe aware of your surroundings, pedestrians, other equipment when working. Operators are to use equipment which they are trained / certified to operate.

Ensure safety guards and devices are functional on equipment. Do not lift/swing loads over persons

Use proper /properly rated lifting equipment and accessories. Use taglines as necessary

Do not stand under / near suspended loads.
Do not stand where you can be struck by or pinned / crushed by the load swinging.
Use of a signal person / banksman as necessary.

Hand wash stations are installed and must be used by all persons.
Cleaning is done daily on the Port
Washrooms are provided for use of employees. Drinking water is provided for employees. Welfare amenities are provided for employees. Sanitization of the Port is conducted frequently.
Pest Control is conducted frequently

Wear proper footwear at all times.
Be aware of the walk path / work area / walking surfaces.
Be attentive/ careful on stairways / loading bays.
Be vigilant of your surroundings when working at heights.

Use safety harness /lanyards and other safety precautions when working at height.

Report spills,slippery / unsafe surfaces forthwith.

Use handrails where provided.Walk properly and do not run unnecessarily.
Do not engage in horseplay. Use chairs /furniture as designed, do not “rock” on chairs / benches. Do not use defective furniture.

Do not have cluttered areas / loose cables /cords which may cause trips

Be aware of items falling off racks as well as racks falling.

Stand clear of racks when loading / offloading cargo onto / from racks.
Be alert to forklifts / vehicles / equipment operatingStand clear of forklifts / vehicles / equipment.

Be aware of the chemicals and the hazard / warning labels.
Report spills immediately.Exercise caution when working at heights.
Exercise caution when de-stuffing containers.

If indoor – Drop,cover and hold on. Move as little as possible. Stay away from windows to avoid being injured by shattered glass. Stay indoors until the shaking stops and you are sure it is safe to exit. If you must leave the building after the shaking stops, use stairs rather than an elevator incase there are aftershocks, power outages or other damage. If outdoor -Find a clear spot and stay there until the shaking stops (away from buildings, power lines, trees, streetlights). 

If you are in a vehicle, pull over to a clear location and stop. Avoid bridges, overpasses and power lines if possible. Stay inside with your seatbelt fastened until the shaking stops. Then, drive carefully, avoiding bridges and ramps that may have been damaged.  If a power line falls on your vehicle, do not get out. Wait for assistance.

If you are in a mountainous area or near unstable slopes or cliffs, be alert for falling rocks and other debris. Landslides are often triggered by earthquakes.